In 2023, how much will a paver walkway cost?

In 2023, how much will a paver walkway cost?

Paver pathway installation typically costs $2,665, with expenditures per square foot ranging from $8 to $50.

See Prices Near You
Paver pathway installation typically costs between $1,565 and $3,765, including labor. The average cost is $2,665. If the job needs a complicated finish or substantial prep work, be prepared for the cost to increase.

Paver paths can be expensive, but they are versatile, strong, beautiful, and often simple to maintain. There is a paver to fit whatever style you choose for your landscaping project, unlike other options. Pavers are also very customizable.

Continue reading to find out more about the various paver materials, their costs, and the elements that determine the price of hiring a contractor to install a paver walkway.

Costs of a paver pathway in 2023, on average $2,665 nationally
Price range typically $1,565 to $3,765

Low end products cost $1,400.
High-end products cost $4,665
Most Americans pay between $1,565 and $3,765 for a finished job, with the average cost of installing a paver walkway being $2,665, or around $14.50 per square foot. A large paver pathway with high-end materials, steps, and decorative embellishments starts at $4,665, while a small, plain paver walkway costs $1,400.

See Prices Near You
Cost calculator for paver walkways, by size
Calculating the length and width of the pathway’s footprint will assist you in estimating the project’s cost because size plays a significant role in the cost of installing a paver walkway. The cost calculator below uses an average price of $14.50 per square foot to estimate costs for pathways of various sizes.

Average Cost for Paver Walkway Size 80 square feet ($1,160), 140 square feet ($2,030), and 280 square feet ($4,060)

Cost Calculator for Paver Walkways, by Kind

Pavers are available in a variety of designs, hues, sizes, and pricing points, so your selections will affect the ultimate price. Yet, the cost of installing pavers varies from $8 to $50 per square foot.

concrete paving
If you’re looking for a long-lasting, low-maintenance, and reasonably priced material, concrete pavers are fantastic. They cost between $8 and $15 per square foot.

Concrete pavers often have a lifetime structural integrity warranty and are made to bear more pressure than typical poured concrete.

Bonus: These pavers will complement practically any home style due to their homogeneous appearance.

Bricks made of clay
Among the most attractive paving materials, clay brick pavers have a classic appearance. Bricks can theoretically be used to make countless designs, from very simple to extremely elaborate, thanks to the availability of different patterns and textures.

Although not as resilient as concrete pavers, if installed on a solid surface and maintained consistently, they can easily sustain ordinary sidewalk usage. The cost of brick pavers varies from $10 to $20 per square foot.

Native stone paving
Another low-maintenance but pricey paving material is natural stone, which ranges in price from $12 to $50 per square foot. Its variations, including flagstone, marble, and bluestone, offer a classic aesthetic and blend well into any landscape design.

lattice paving
Slate pavers come in a variety of hues and are far more durable than real slate. For homeowners who wish to combine the natural feel and aesthetic of slate with the added strength of concrete, slate pavers are a fantastic option. Per square foot, they cost between $11 and $20.

Other Elements that Influence Price

There are various additional things you should take into account that can greatly effect the entire cost in addition to the size and kind of paver. These elements consist of;

Pavers typically charge $55 per hour for labor. This sum is determined by the complexity of the project, the contractor’s experience, and the labor rates in your area.

Contractors may need to remove old concrete or grade the installation area to guarantee proper drainage, depending on the state of the site. Grading costs between 8 cents and $2 per square foot, and removing concrete and dirt costs between 30 cents and 50 cents.

A walkway costs more to add steps and elaborate patterns than it does to have straightforward routes. This is due to the installation requiring extra time and resources.

Decorative elements
The walkway can have some more elements added, but at an additional expense. Other features consist of:

Single-color concrete stains are priced between $2 and $4 per square foot.
The price of stamped concrete per square foot ranges from $8 to $28.
Costs for walkway covers range from $4 to $30 per square foot.
Permits If your local regulations need one or if the walkway links to a public road, you might need to think about the expense of a permission before establishing a walkway. A walkway construction permit normally costs $200 or more. When requesting bids from contractors, inquire about this necessity.

Comparable Services

Why just construct a walkway? There are several ways to spruce up and improve the usability of your new pathway.

landscape illumination
Landscape lighting not only makes it safer for you to move about your outside area at night, but it also gives it a striking appearance. Costs for landscape lighting range from $2,000 to $4,500.

Garden edging
After installation, it’s crucial to edge or curb your walkway. They maintain the pavement material in place and preventing plants from encroaching on the sidewalk in addition to giving the area a neat, tidy appearance. Depending on the size and material chosen, a landscape edging project typically costs $1,325.

concrete patio
Pavers have many advantages over other patio building materials, including durability, attractiveness, low maintenance, and simplicity of repairs. The average cost to install a paver patio is $2,251.

Different kinds of Walkways

With an average cost of $1,620, concrete walkways are less expensive than mid-range or premium pavers. Concrete can be utilized to swiftly and economically cover a huge area. Even with installation fees, pavers are more expensive but provide more aesthetic alternatives.

The least expensive kind of walkway costs an average of $335 in gravel. It is also the simplest to install, but in some neighborhoods that demand more durable materials, HOAs or construction officials might not allow it.

Pro vs. DIY pricing

If you are an expert do-it-yourselfer, you can install a paver walkway by yourself. Digging, leveling, tamping, measuring, and the use of both common and specialized tools are all necessary steps in the DIY paver walkway construction endeavor.

DIY Equipment and ToolsAverage Cost
Pavers$15 ( per 16’ x 16’ stone)
Tape measure$18
Shovel $20
Crushed gravel$800 per pallet
Garden rake$20
Garden hose with nozzle$45
Paver sand$5 per bag
Finishing trowel$20
Concrete saw$1000
Safety glasses$14
Construction adhesive$5
Work gloves$15
Dust mask$25
Polymeric sand$30 (40-pound bucket)
Leaf blower$130

Unless you already possess the necessary equipment and expertise, it is clearly more cost-effective to hire a professional or stonemasonry firm to perform the project.

Location-specific paver walkway prices

Because labor and material costs vary depending on region, plan on your paver walkway project cost fluctuating. Where paving materials are not available locally, costs are typically greater; the same is true for urban regions with higher overhead and cost of living.

Final thoughts

A paver walkway is exactly what you need if you’re building, remodeling your house, or just trying to make your landscaping look nicer. Pavers greatly enhance your outdoor living space’s curb appeal, general attractiveness, and warmth. Pavers can be expensive up first, but compared to other options, they eventually pay for themselves.

Leave a Reply

Scroll to Top
%d bloggers like this: